Fantasy Settlement HueForge with frame

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.56mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #57463c PLA BambuLab Matte Dark Brown Transmission Distance: 2 #003b3b PLA BambuLab Basic Green Transmission Distance: 2 #3f8e43 PLA BambuLab Basic Mistletoe Green Transmission Distance: 1 #56b7e6 PLA BambuLab Matte Sky Blue Transmission Distance: 1.3 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 7 unique filaments Swap Instructions: Start with Black At layer #10 (0.52mm) swap to Blue Gray At layer #14 (0.68mm) swap to Dark Brown At layer #19 (0.88mm) swap to Green At layer #22 (1mm) swap to Mistletoe Green At layer #25 (1.12mm) swap to Sky Blue At layer #29 (1.28mm) swap