Thingiverse
Fender Tuner Nut Drill Guide
by taqTokToe
0
Downloads
0
Likes
0
Makes
Designed for accurate drilling and spacing of tuner holes on a Telecaster-style headstock when using Wilkinson JN05L locking tuners.
Specifications:
10 mm diameter holes × 24.5 mm spacing
Requirements:
• Tuner drilling jig
• 2 × locator pegs
Method:
1. Position the jig using the locating lip.
2. Drill one E tuner hole.
3. Insert a locator peg.
4. Drill the opposite E tuner hole.
5. Insert the second locator peg.
6. Drill the remaining holes.
The jig was intentionally made thicker so it could also function as a basic drill guide.
Currently, this is a one-shot tool, as the 10 mm holes are a tight fit — but it performed perfectly.
Specifications:
10 mm diameter holes × 24.5 mm spacing
Requirements:
• Tuner drilling jig
• 2 × locator pegs
Method:
1. Position the jig using the locating lip.
2. Drill one E tuner hole.
3. Insert a locator peg.
4. Drill the opposite E tuner hole.
5. Insert the second locator peg.
6. Drill the remaining holes.
The jig was intentionally made thicker so it could also function as a basic drill guide.
Currently, this is a one-shot tool, as the 10 mm holes are a tight fit — but it performed perfectly.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
