Thingiverse

Fiddleblock pulleys

von peterdguru

0 Downloads

0 Likes

0 Makes

A custom fiddleblock double pulley suitable for 3/8 th inch ( 10 mm ) rope. I designed this for my sail boat. Printed in PETG with 6 walls for strength. I would not trust this to have a working load greater than 40lbs. I would not use PLA either as it is prone to sudden failure. Requires 2 bolts 6mm or 0.25 in.

block fiddle block pulley rope sailing sailing boat

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat

STL

Material

PLA, PETG

Nachbearbeitung

Hardware

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Fiddleblock pulleys

Ähnliche Modelle

Zur Sammlung hinzufügen