Thingiverse
Fidget Spinner
by eclipsefire
47
Downloads
26
Likes
0
Makes
**Want one printed? [Order from my 3DHubs.com account!](https://www.3dhubs.com/service/nick) **
**Uses 3 608ZZ Bearings. [Order from Amazon](https://www.amazon.com/gp/product/B002BBICBK/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&tag=athomeatomics-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B002BBICBK&linkId=4a3f94853df8b3e8054e5d645cbaf939)**
Tried my hand at designing a dual fidget spinner. Created using SketchUp 2017.
For printing you'll want to take into account the dimensional accuracy as you want the bearings to be a tight fit. Scaling the model should help adjust to get a good fit, if it's a little loose you can use a bit of CA glue (superglue) to fix it in position. _Note: Be careful not to get any glue on the bearings as you could seize them up._
Be sure to share any comments and photos if you print one!
**Uses 3 608ZZ Bearings. [Order from Amazon](https://www.amazon.com/gp/product/B002BBICBK/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&tag=athomeatomics-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B002BBICBK&linkId=4a3f94853df8b3e8054e5d645cbaf939)**
Tried my hand at designing a dual fidget spinner. Created using SketchUp 2017.
For printing you'll want to take into account the dimensional accuracy as you want the bearings to be a tight fit. Scaling the model should help adjust to get a good fit, if it's a little loose you can use a bit of CA glue (superglue) to fix it in position. _Note: Be careful not to get any glue on the bearings as you could seize them up._
Be sure to share any comments and photos if you print one!
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
