Thingiverse
Fidget Spinner
door eclipsefire
47
Downloads
26
Likes
0
Makes
**Want one printed? [Order from my 3DHubs.com account!](https://www.3dhubs.com/service/nick) **
**Uses 3 608ZZ Bearings. [Order from Amazon](https://www.amazon.com/gp/product/B002BBICBK/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&tag=athomeatomics-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B002BBICBK&linkId=4a3f94853df8b3e8054e5d645cbaf939)**
Tried my hand at designing a dual fidget spinner. Created using SketchUp 2017.
For printing you'll want to take into account the dimensional accuracy as you want the bearings to be a tight fit. Scaling the model should help adjust to get a good fit, if it's a little loose you can use a bit of CA glue (superglue) to fix it in position. _Note: Be careful not to get any glue on the bearings as you could seize them up._
Be sure to share any comments and photos if you print one!
**Uses 3 608ZZ Bearings. [Order from Amazon](https://www.amazon.com/gp/product/B002BBICBK/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&tag=athomeatomics-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B002BBICBK&linkId=4a3f94853df8b3e8054e5d645cbaf939)**
Tried my hand at designing a dual fidget spinner. Created using SketchUp 2017.
For printing you'll want to take into account the dimensional accuracy as you want the bearings to be a tight fit. Scaling the model should help adjust to get a good fit, if it's a little loose you can use a bit of CA glue (superglue) to fix it in position. _Note: Be careful not to get any glue on the bearings as you could seize them up._
Be sure to share any comments and photos if you print one!
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!