fierce

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.71618mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #75787b PLA anycubik textGray Transmission Distance: 2.4 #ffffff PLA Generic White Transmission Distance: 4 #ae272b PLA Generic red Transmission Distance: 6.4 #ff5500 PLA Generic orange Transmission Distance: 7.2 #ffff00 PLA Generic yellow Transmission Distance: 7.2This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #11 (0.56mm) swap to Blue Gray At layer #14 (0.68mm) swap to textGray At layer #19 (0.88mm) swap to White At layer #27 (1.2mm) swap to red At layer #31 (1.36mm) swap to orange At layer #36 (1.56mm) swap to yellow for the rest. Boost Me