Filament Rack

Spool racks do exist, but unfortunately, either not in the right diameter or not to my taste. So, just a quick note: my taste is set and won't change. However, if you need a different diameter for the rods, feel free to message me or leave a comment! Cost Overview The shelf is 80 cm wide, has two rows, and holds up to 20 spools. Materials UsedPETG Filament: 1.2 kg, starting from 15€ (depending on brand and availability)Wooden Dowel: 22 mm diameter, 3.2 m length, around 10€Tools UsedSlitting saw for Wood with Mitre box: arround 7.50€ (alternatively, circular saw, jigsaw, etc.)Sandpaper: approximately 0.50€Utility Knife: (alternatively, any sharp knife) Preparation and Assembly It’s best to start the print first, as it takes about a day. While your printer is working, you can get the dowels and cut them to the required length. Assembly is easier if all the dowels are the same length. The easiest way is to cut the first one to size and then use it as a template for the others. If you