MakerWorld

Sculptures

fireman model

by firemen14 · Sculptures

6 Downloads

4 Likes

2 Makes

Go to Model

Firefighter model that can be sanded and colored after printing.

Category

Sculptures

Source

MakerWorld

Published

23.12.2025

Updated

27.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed · large print

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for fireman model?

Any FDM printer should handle fireman model just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does fireman model need supports when printing?

Yes, fireman model will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is fireman model available in?

fireman model is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is fireman model free to download?

Yes, fireman model is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

fireman model

Similar Models

Add to Collection