First layer test

by Tringi4 · Test Models

139 Downloads

5 Likes

1 Makes

Go to Model

First layer test for a 200x200mm print area.
I leave a 10mm gap from the edges.
Print for 10 minutes at low speed.

Category

Test Models

Source

Printables

Published

24.01.2024

Updated

24.01.2024

What you need to print this: Intermediate Low confidence

Why?

large print

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Software

Cura, PrusaSlicer, or similar

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions