Thingiverse

First Layer Test

von mikeneron

664 Downloads

330 Likes

0 Makes

Some test files to adjust your settings to get the perfect first layer. These will print 1 layer provided you are using a 0.2 mm layer height in your slicer settings. Then inspect your print and tweak one setting at a time until you get a perfect first layer as that is the most important layer.

Once you get a good result with the simple shapes, try the extreme test. If you can get that to print without any gaps, then you have a perfect first layer.

adhesion bed adhesion calibration FIRST first layer First layer test layer settings single layer test test print adhesion bed adhesion calibration FIRST first layer First layer test layer settings single layer test test print

Quelle

Thingiverse

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Warum?

0.20mm Schichten

Einteilig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker