Creality Cloud

Flame Tea light

0 Downloads

0 Likes

0 Makes

A flame inspired tea light holder Both parts print in vase mode. With the top, set your bottom layers to zero so that it prints without a base. There are two heights of base to choose from and the width of the base also means you can fit the 70mm round battery lights in there too.

Source

Creality Cloud

Published

27.11.2025

What you need to print this: Intermediate Medium confidence

Why?

no supports · 2 colors · large print

Support-free Single piece 2 colors / AMS

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Colors

2 (AMS/MMU recommended)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Flame Tea light?

Any FDM printer should handle Flame Tea light just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Flame Tea light need supports when printing?

No supports needed for Flame Tea light — it's designed to print clean off the bed.

What file format is Flame Tea light available in?

Flame Tea light is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Creality Cloud.

Is Flame Tea light free to download?

Yes, Flame Tea light is available as a free download through Creality Cloud. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Flame Tea light

Add to Collection