flames

Project: firePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x133.24mm in sizeYou may print at higher layer heights below the Min Depth of 0.4mmThe Max Depth is 2.1mm and the Actual Depth is 2.1mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Orange At layer #19 (1.6mm) swap to Yellow for the rest.