Thingiverse
FlashForge Creator Pro Plate Level Block
di mojoyup1528
6
Download
1
Likes
1
Makes
UPDATED FOR BETTER HEIGHT:::
Used to help level bed of creator Pro. Height is 10mm and adjustments should be made after to your filament settings.
This is a work in progress, so report any info that may help with future designing of this.
Idea: To simplify the leveling process for newcomers and experts alike.
Usage: Slips between the platform and bed where the knob springs are. Center platform knob will stop it from going all the way so its easier to take out after adjustment.
NOTE: Will not apply if extruder is not level already. Will void leveling bed. Make sure extruder is level first.
UPDATE: without putting anything on the platform, such as tape etc, I measure a flat 10 mm. So, depending on what you use can affect the height.
Used to help level bed of creator Pro. Height is 10mm and adjustments should be made after to your filament settings.
This is a work in progress, so report any info that may help with future designing of this.
Idea: To simplify the leveling process for newcomers and experts alike.
Usage: Slips between the platform and bed where the knob springs are. Center platform knob will stop it from going all the way so its easier to take out after adjustment.
NOTE: Will not apply if extruder is not level already. Will void leveling bed. Make sure extruder is level first.
UPDATE: without putting anything on the platform, such as tape etc, I measure a flat 10 mm. So, depending on what you use can affect the height.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
