Slicer Discord
Flashlight Diffuser (adjustable) – 3D-Druckmodell von Thingiverse Thingiverse

Flashlight Diffuser (adjustable)

von Yenya
50 Downloads
28 Likes
0 Makes
Zum Modell
This is a simple and adjustable diffuser for LED flashlights. It comes handy when the flashlight has too narrow beam and much wider or softer light is needed.

The flashlight with the diffuser can be for example hung from the tree branch or from the top of the tent to illuminate wider area.

The default dimensions are set up for the Zhishunjia ZSJ-T29 flashlight from DX.com: http://www.dx.com/p/zhishunjia-zsj-t29-cree-xm-l-t6-1000lm-5-mode-white-flashlight-black-1-x-18650-317226

(Note however: I cannot really recommend this particular flashlight - it is stated to have 2.4A circuitry and 1000 lumens, but in fact it gives only about 600 mA to the LED, which corresponds to about 250 lumens for Cree XM-L T6. Other than that, it is well built and works OK.)

See also my other diffuser for the LZZ-186 headlamp, which is a bit more complicated: http://www.thingiverse.com/thing:187055
Quelle
Thingiverse
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen