Thingiverse
FlashSCADâ„¢ flash diffuser
von Appxela
9
Downloads
3
Likes
0
Makes
Parametric flash diffuser for your external flash. Simply define the opening dimensions of your flash.
Use of natural ABS or PLA is recommended although it may work with colored materials for effect such as background fills.
Different fill percentage when you print the diffuser for different diffuser effects. You can also vary the wall thickness during printing for more variation and strength.
When using the flash, you may have to play with your camera white balance depending on the type of plastic you are using.
Use of natural ABS or PLA is recommended although it may work with colored materials for effect such as background fills.
Different fill percentage when you print the diffuser for different diffuser effects. You can also vary the wall thickness during printing for more variation and strength.
When using the flash, you may have to play with your camera white balance depending on the type of plastic you are using.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
