Floating Castle

My first HueForge and a creative idea I had for this image. Enjoy these models of mine!I had to upload just the stl file as the slicing time exceeded the limit of MakerWorld. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Swap Instructions:Start with BlackAt layer #9 (0.8mm) swap to GreenAt layer #14 (1.2mm) swap to T