Floating Corner Shelf

It is a struggle - the more you print the more space you need to showcase all the makes. But wait! Now you can print space - with my new designed Floating Corner Shelf! The size of the shelf is 185 x 185 x 240mm. You need 4x 4.5mm screws for assembly. Depending on your wall they need to be 45mm long. For my walls I am using 6x30mm wall plugs and 4.5x45mm screws. Print preparation:Make sure that your print bed is clean and grease-free and use a quality brand and dry filament. Calibrate your filament if necessary because the sliding mechanism has tight tolerances.Print settings:Use the 0.2mm standard settings for everything. I recommend support at least for the bracket. A brim for the shelf is recommended to increase the bed adhesion. Set the wall number to three for a robust print. 8% gyroid infill should be enough.An AMS is not necessary. See my 3mf print profile for details. Assembly:Attach the bracket to your wall. Use a spirit level to align the bracket.The holes in the bracket have