flying eagle

The frame is made with frame generator for HueForge by Girouxra.https://makerworld.com/en/models/514362#profileId-430525 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA 3dpower black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA Prima Value Light gray Transmission