Foam cannon conversion stud

Convert your foam cannon to a wide neck bottle.
It is alot easier to mix chemicals, clean and rinse a wide neck bottle.

This stud goes in between your foam cannon and any bottle with a cap.

Bottle cap will need a 27 mm hole cut out.

1. Get a bottle with a wide cap. (Cycle drinking bottle, jar or what ever...)

2. Print the "Cut hole template" and use the inside of the template to mark up a 27mm hole.

3. Cut, drill or dremel the hole.

4. Meassure the thickness of the cap around the cut out hole.
Short stud 1.5mm thickness, medium stud 3.2mm thickness, long stud 10.6mm thickness

5. Chech which thread your foam cannon uses. (28/410 BSP = most normal PF22. MJJC seems more like a standard soda bottle threads.)

6. Print the most fitting stud due to threads and length.

7. Mount stud from inside cap, and tighten with 27mm wrench/socket.


Contact me if you need different threads or different length on the stud.