Freddy vs. Jason Hueforge

Project: Freddy_vs_JasonPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 235x132.19mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.4mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Pro Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite Pro White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #14 (1.2mm) swap to Blue Gray At layer #18 (1.52mm) swap to Grey At layer #23 (1.92mm) swap to White for the rest.