MakerWorld

Decor

Gargoyle

by Randy · Decor

52 Downloads

26 Likes

22 Makes

3D Scanned Gargoyle Statue, he is printed at 100mm tall(4 Inches) I used a 25% grid infill which gives him a descent weight(70 grams) for his size. I use tree supports which are only needed for his finger tips, so not much waste.

gargoyle dnd statue

Category

Decor

Source

MakerWorld

Published

06.09.2024

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed · large print

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Gargoyle?

Any FDM printer should handle Gargoyle just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Gargoyle need supports when printing?

Yes, Gargoyle will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Gargoyle available in?

Gargoyle is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Gargoyle free to download?

Yes, Gargoyle is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Gargoyle

Similar Models

Add to Collection