Geeetech A10M LCD Case

I have hated the Geeetech LCD mount since I got it. So I designed this little case in Fusion 360. I have included the step file so you can easily put different text on the case and otherwise easily modify it. I chose not to mount it to the frame, but instead added silicon feet to keep it steady on the table. You'll need four 3mm bolts to mount the LCD in the case.

For printing: Print the bottom with the feet on the build plate and built plate supports. Print the top face down. You will only need supports for the top in the SD card slot. You can add custom supports in your slicer to hold up that slot.

UPDATE: I uploaded V2 files (.step and .STL) for case top. I enlarged the opening for the reset button a bit. The first version allowed a press on the surface of the case to trigger the reset button. I recommend everyone use the V2 of the top (A10BoxV2) and .step files.