Generation Kill Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 136x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 4 unique filaments Swap Instructions: Start with Charcoal At layer #11 (0.96mm) swap to Blue Gray At layer #13 (1.12mm) swap to Scarlet Red Border Only Colors from here until the end. At layer #20 (1.68mm) swap to Ivory White for the rest.