Godzilla Hueforge

Project: Godzilla.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used:PLA Bambulab Black Transmission Distance: 0.3PLA Rosa 3D Starter grey Transmission Distance: 0.6PLA Bambulab White Transmission Distance: 5PLA BambuLab Basic Red Transmission Distance: 4.1This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #8 (0.72mm) swap to greyAt layer #11 (0.96mm) swap to WhiteBorder Only Colors from here until the end.At layer #18 (1.52mm) swap to RedAt layer #29 (2.4mm) swap to White for the rest.