Graber Evolution
von Luizgperez
19
Downloads
24
Likes
0
Makes
A simple project to transform a Graber I3 (stock) into a Graber Core XY machine. With CoreXY system, Bowden Extruder Allmetal and (in future) Dual Color with Single Nozzle.
You will need the same material on Anet Evolution (www.thingiverse.com/thing:2786292).
I included a little things, like a box to eletronics with fan, a LCD holder, a Filament Holder and a X-Carriage to fit with my extrusor.
The number before the name of the file is how many copies you need to print of each part.
Some pieces were cut to be able to print on small beds (200x200), and they had to be glued together. These pieces have the same name, changing the number to the end (part 1 / part 2)
Depending on the size of your linear guides, they will not have the correct fit. I needed to buy 4 new guides (2 x 470mm and 2 x 370mm).
This design can be changed to make a Closed Core XY by simply adding the acrylic plates.
You will need the same material on Anet Evolution (www.thingiverse.com/thing:2786292).
I included a little things, like a box to eletronics with fan, a LCD holder, a Filament Holder and a X-Carriage to fit with my extrusor.
The number before the name of the file is how many copies you need to print of each part.
Some pieces were cut to be able to print on small beds (200x200), and they had to be glued together. These pieces have the same name, changing the number to the end (part 1 / part 2)
Depending on the size of your linear guides, they will not have the correct fit. I needed to buy 4 new guides (2 x 470mm and 2 x 370mm).
This design can be changed to make a Closed Core XY by simply adding the acrylic plates.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
