Graffiti Thor Hueforge

Please leave a rating or comment if you like the print! Want to sell my prints? Commercial License now available here: https://patreon.com/3ReePrinting Check out the rest of my Hero/Villain series here: https://makerworld.com/@3ReePrinting/collections/3340968 I went for the Ragnarok version of Thor. I just like the shorter hair personally. This print is the maximum build plate size for an A1 Mini, but it should work on any printer. Boost MeThank you for the support! If you resize the model make sure you do NOT scale the Z axis or the print colors will not be in the same position Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 170x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Maroon Red Transmission Distance: 1.3 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLa