Grargoyle

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x150mm in size. You can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct. You may print at higher layer heights below the Base Thickness of 0.64mm. The Max allowed Thickness is 2.16mm and the Actual Thickness is 2.16mm Filaments Used: PLA Elegoo + Black Transmission Distance: 0.3 PLA Elegoo + Gray Transmission Distance: 3 PLA Aurapol Beige Transmission Distance: 2.4 PLA Elegoo Basic White Transmission Distance: 7 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Gray At layer #17 (1.44mm) swap to Beige At layer #18 (1.52mm) swap to White for the rest.