Groot Hueforge

Groot HueforgeNo AMS needed. Just switch out colors at layer height.   Don't forget the frame: Frame for baby groot hueforge by Dohara | Download free STL model | Printables.com   Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used:PETG JAYO Black Transmission Distance: 0.3PETG JAYO Gray Transmission Distance: 2.5PLA+ Sunlu Red Transmission Distance: 6PLA BambuLab Basic Orange Transmission Distance: 10PLA BambuLab Basic Yellow Transmission Distance: 6PETG JAYO White Transmission Distance: 6 !!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!! Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to GrayAt layer #9 (0.8mm) swap to RedAt layer #14 (1.2mm) swap to OrangeAt layer #17 (1.44mm) swap to YellowAt layer #19 (1.6mm) swap to White for the rest.    Please "Like", review, follow and upload make. I spend a lot of time designing and allow it all to be used for free (including commercially). If you'd like to help me out, below are the possible ways. Thank you in advance! https://www.buymeacoffee.com/dohara1985o