H2D AMS Riser

I am delighted with the AMS riser for my X1C and have now adapted the model to my H2D. As the top glas does not have to be raised on the H2D, I have made the riser a little flatter and taken into account the special features such as the magnet on the glass. There are two additonal STL files of the drawers available, for the full-length drawers the drawers have to be split and printed with both nozzles, but the shorter drawers still offer plenty of space. There is a gasket set that can be printed in TPU, I used thin foam rubber here, but for H2d users with a laser and cutter this may be a variant. I used a 4x3mm round magnet. Make sure the magnet has the same orientation as the original on glas cover, i have placed the new magnet on the cover magnet, marked the lower side and made sure this marked side is facing up when glued in place. In one picture you can see two support pieces (one on each front part) which have to be removed after printing, they improve the adhesion for the thin wa