Thingiverse
hard disk drive stack rack
von ACChua
101
Downloads
84
Likes
0
Makes
hard disk drive stack
you will need 4pcs thumbscrew for each hard drive
how to align
loosely screw 2 drives on each other... tighten while on top of each other
3rd hard drive.. you can just tighten on an aligned drive.
2 files available.. in my experience 500gb and below use short and 1gb above use extended..
they are just 1.5mm difference.. if not sure use extended
you will need 4pcs thumbscrew for each hard drive
how to align
loosely screw 2 drives on each other... tighten while on top of each other
3rd hard drive.. you can just tighten on an aligned drive.
2 files available.. in my experience 500gb and below use short and 1gb above use extended..
they are just 1.5mm difference.. if not sure use extended
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!