HART Stack System drawer Gridfinity baseplates

Mirrored Plates uploaded 5/6/24. Added spacers to the original 4x3 baseplates to make them fit in the drawers.Wanted to modify my Clickfinity Refined plates to fit inside the HART Stack System Two Drawer Tool Box from Walmart, but found out that the bottom of the drawers weren't stiff enough to allow the bins to be snapped into place. The Gridfinity Refined plates work well, though, and the plate to plate dovetails allow you to connect them all together. The OG Gridfinity Magnetic plates work well too, I'd just suggest bridging the baseplates with some of the bins to keep them in place. Alternatively, you cold use glue or double sided superglue tape to hold them in place. You will need to print 4 of these baseplates (2 A and 2 B for which version you choose) to line the whole drawer. For the Gridfinity Refined plates, you will also need 14 plate to plate dovetails to attach them together. Including spacers (will also need 2 of each) if you want to use these with some other Grid