Thingiverse
HDD bracket
door C_s_M
3
Downloads
1
Likes
0
Makes
This is a remix of fjohn624's "Simple 6 drive hard drive caddy".
I started with doubling the thickness. That led to the necessity for the holes to allow the 6-32 UNC type screws to be buried in and in addition, I wanted to reduce the size of the segments to improve the air flow.
The holes are a bit narrower, to keep the screws in position to be easier to assemble.
After some testing I'm confident this will prevent the warping under the weight. If not, I can always increase the fill.
I will include the .ipt file, feel free to modify more.
I started with doubling the thickness. That led to the necessity for the holes to allow the 6-32 UNC type screws to be buried in and in addition, I wanted to reduce the size of the segments to improve the air flow.
The holes are a bit narrower, to keep the screws in position to be easier to assemble.
After some testing I'm confident this will prevent the warping under the weight. If not, I can always increase the fill.
I will include the .ipt file, feel free to modify more.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!