Headphone Stand

I liked the headphone stand from MakerBot, but it is very hard to print and takes a long time. I made a simple model after the same style but prints in well under 2 hours. And you can fit all the parts together on a single 200mm x 200mm build platform. It requires no supports.

** Stand height:** 230mm

**UPDATE 8/5/2017** I made another version of the model that is 250mm tall for people with larger headphones. This will still fit on a 200mm x 200mm build plate, but pieces will need to be printed separately and back piece will need to be placed at a 45 degree diagonal in order to fit.

**UPDATE 8/24/2017** I beefed up the back of the 250mm tall model by making it 11mm thick instead of 7mm thick because some people reported bending over time. This thicker version is 250mm V2.

**UPDATE 8/22/2019** I completely redesigned the joints and tabs that hold the pieces together to make them much stronger. These are updates for me since I use this every day at work.

https://you