Heavier

Have you ever felt like a normal lighter just wasn't sufficient??? Well, here is your solution! The Heavier is an approx 3.5x larger prop lighter to make your friends and family understand the value of your 3D-printer. Available in AMS and non-AMS. After printing all parts, remove supports. To assemble the top lighter parts, you will need to place the long pin through the cover and the wheel. *You may need to drill the holes larger, depending on your printer's tolerance capabilitiesNext, place the striker into the nozzle. Glue should not be needed as it is a tolerance fit. *Be careful, as it's a small, fragile piece.This would be the point where, if you wanted, you could adjust the striker piece to make it contact the wheel and improve realismTo begin final assembly, place the nozzle assembly into the provided hole on the lighter body. *Glue or some other fusion will probably be needed for this stepNext, place the cover assembly into the provided area around the nozzle. *Th