Helical Water Feature

Artistic water feature designed to accommodate a small pump. Use of a pump allows for a continual flow of water, creating a unique piece of decor. Water will bubble up out of the top, pooling and gently cascading down each of the 4 helixes. Drain holes in the bottom pool allow for continuous flow. Designed for pots with an inner diameter of approximately 147 mm, but an optional container is available for printing. Please see build notes below for details. A small pump with variable flow is recommended, as this allows for a gentle flow out of the top spherical piece. The inner channel (cross section in images) accommodates 10mm or 3/8" tubing. As previously noted, 100% scale works with pots with an inner diameter of ~147mm, or the optional container included in the print profile. Dimensions are ~159 mm diameter and 197 mm tall. It should scale up as print volume allows, and down-scaling will be limited by the tubing solution being used (can scale down to about 93% for 3/8" tubin