Helldivers 2 (HueForge)

Project: Helldivers.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 199.99x112.49mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Brown At layer #13 (1.12mm) swap to Yellow At layer #18 (1.52mm) swap to Ivory White for the rest. Remember if you sant to scale, do it only with x and y axis, z must be the same as original.