HellRaiser

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x197.78mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Gray At layer #13 (1.12mm) swap to Blue At layer #14 (1.2mm) swap to Battleship Gray At layer #15 (1.28mm) swap to Light Blue At layer #17 (1.44mm) swap to White for the rest.for battleship gray you can use blue gray