Thingiverse

Hinge

by Qonto

49 Downloads

41 Likes

0 Makes

Go to Model

Simple hinge. 28 mm long. I used a 28mm long M3 screw in the barrel. Less than a 20 min print.

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

No ratings yet

No comments yet – be the first!