Thingiverse
Household
Go to Model
Hose / Pipe / Cable Clamp Set
595
Downloads
403
Likes
0
Makes
A set of screw fasteners for hoses, pipes or cables. I have created the sizes 10,20,30,40 and 50 mm, but it should be no problem to scale accordingly for intermediate values.
I recommend to scale always larger than smaller, so that the screw holes are not too small, so you need for example a fastener for a 26 mm hose you just take the 20mm fastener and scale it to 130%.
And here's a tip: turn the clamp to the side for printing, so you have a cleaner, easier and more stable print. (I have included a photo of my print on the printing plate for example).
x = 10mm /20mm /30mm /40mm /50mm
As always in my designs, I did my best to avoid the need for supports in printing and kept the print itself simple. Do the environment the favor and produce less waste.
I recommend to scale always larger than smaller, so that the screw holes are not too small, so you need for example a fastener for a 26 mm hose you just take the 20mm fastener and scale it to 130%.
And here's a tip: turn the clamp to the side for printing, so you have a cleaner, easier and more stable print. (I have included a photo of my print on the printing plate for example).
x = 10mm /20mm /30mm /40mm /50mm
As always in my designs, I did my best to avoid the need for supports in printing and kept the print itself simple. Do the environment the favor and produce less waste.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
