HP SERVER PSU XT60 CONVERSION

Enclosure for HP server PSU conversion with switch and 2x 12V XT60 output. I've used 656363-B21 750W with screw hole on the side, hole is just on one side, its no perfectly secured but its good enough. Other models may not have or its in different place so you may have to improvise. I've used 10awg silicon wires, pay attention to cut to proper length and avoid to heat them up for long otherwise they become stiff. Print in ASA or ABS if possible. Switch should be between pin 36 and 37 but check for your PSU model. Feet screws are a bit longer to push it agains PSU and locked it in place. BOM2x XT60E-F https://www.aliexpress.com/item/1005003168094305.html?channel=twinner20mm rocker switch https://www.aliexpress.com/item/1005005857152594.html?channel=twinnerSilicon wire 10-12 AWG 9x m3x8mm schs4x m3x10mm countersunk for XT608x m3 nut4x m3 heat insert