HSV Lightbox

Update 14.3.2024:I Added a Version with 4 Layers for more stability and a Version with support Layer if you have problems that the parts dont stay connected Use my print profile, it printed perfect on my P1S. Electronics:I used a 12V LED light strip, a DC barrel connector, a 12 V power supply and some wiresThe power supply and the DC barrel connector I usedhttps://www.amazon.de/dp/B016LV20X6?ref=ppx_yo2ov_dt_b_product_details&th=1https://www.amazon.de/dp/B09PD6J4BN?psc=1&ref=ppx_yo2ov_dt_b_product_details Assembly:Print the Front and the Back part. There are no holes in the model, just add the holes via Bambu Studio. It depends on your light strip or if you want to use a barrel connector. U can also just use a drill.Measure the length of the light strip and then cut it to length.Solder the wires and the barrel connector to the light stripMount everything into the front partFore the back part I used normal aluminum foil with some double sided tape to reflect the light. See picturesClose