Hueforge Alien

Project: HFAlien150.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.1mm and the Actual Depth is 2.1mmFilaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Jade White Transmission Distance: 5PLA BambuLab Basic Silver Transmission Distance: 0.6PLA BambuLab Basic Red Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #7 (0.64mm) swap to Jade WhiteAt layer #14 (1.2mm) swap to SilverAt layer #16 (1.36mm) swap to RedWARNING: This Slider is at the same Layer as the Next SliderAt layer #25 (2.08mm) swap to Jade White for the rest.