Hueforge Bad Batch - TECH

TECH Hueforge. Couple of notes, you can do this all with a single AMS, just be sure to swap the filament colors within the AMS after it has printed. Example, once black has printed place the Red within it's slot, same goes for turquoise and light grey, and finally dark grey will be replaced with White. If slicing yourself I highly recommend changing wall generation from classic to Archane. It will take forever to slice, but it will make the quality a bit better. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 142.83x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA Inland Turquoise Transmission Distance: 3.8PLA 3Dhojor dark Grey Transmission Distance: 1PLA BambuLab Basic Orange Transmission Distance: 5PLA Sainsmart Rose Red Transmission Distance: 2PLA Inland Light Grey Transmission Distance: 1PLA