HueForge - Deadpool

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x170.82mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Generic SUNLU Red Transmission Distance: 5
PLA Generic SUNLU Burly Wood Transmission Distance: 5
PLA Generic SUNLU White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to SUNLU Red
At layer #15 (1.28mm) swap to SUNLU Burly Wood
At layer #17 (1.44mm) swap to SUNLU White for the rest.