HueForge - Magmoor Caverns

Some Metroid Prime fanart done up as a HueForge model. Will I remaster it one day? Probably. For now I'm considering it done.Print photo is done with a .2mm nozzle and took over 12 hours to complete. I haven't tested it with a .4mm nozzle. Red and yellow filaments are BambuLab basic PLA. Black and white are Elegoo.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Yellow At layer #20 (1.68mm) swap to White for the rest.