Hueforge Monkey Dark

Project: HF-Monito Dark.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 150x150mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 3mm and the Actual Depth is 3.1mm Filaments Used: PLA Smart Recycled Black Transmission Distance: 0.5 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Smart Recycled Coral White Transmission Distance: 6.4 PLA PolyLite Grey Transmission Distance: 1 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Black At layer #12 (1.04mm) swap to Blue Gray At layer #15 (1.28mm) swap to Coral White At layer #24 (2mm) swap to Grey At layer #26 (2.16mm) swap to Coral White for the rest.