HueForge: Pitty

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.64mm The Max allowed Thickness is 2.64mm and the Actual Thickness is 1.52mm Filaments Used: #000000 PLA Creality Hyper Black Transmission Distance: 0 #31adff PLA Creality Hyper Blue Transmission Distance: 1.5 #ffffff PLA Giant Arm Matte White Transmission Distance: 4.2 #ff0000 PLA Creality Hyper Red Transmission Distance: 3.7 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Hyper Blue At layer #8 (0.72mm) swap to Black At layer #9 (0.8mm) swap to Matte White At layer #14 (1.2mm) swap to Red At layer #17 (1.44mm) swap to Matte White This slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it. At layer #28 (2.32mm) swap to Black for the rest.