Hueforge Sunflower

Hueforge Sunflower. This model is thicker than default hueforge prints, so it is nice and sturdy on it's own. It will take a little longer to print, but it is worth it. You can print this with 1 AMS if you set both your black and your white filaments to print from the same slot. Just wait until it is done printing the black sometime before it starts printing the white, swap the black spool out for the white. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:PLA+ Sunlu Black Transmission Distance: 0.6PLA PolyLite Brown Transmission Distance: 0.5PLA BambuLab Basic Orange Transmission Distance: 10PLA BambuLab Basic Yellow Transmission Distance: 6PLA+ Sunlu White Transmission Distance: 5Swap Instructions:Start with BlackAt layer #11 (0.96mm) swap to BrownAt layer #17 (1.44mm) swap to OrangeAt layer #32 (2.64mm) swap to YellowAt layer #37 (3.04mm) swap to White for the rest.