Thingiverse
Household
Zum Modell
Hydroponic system
792
Downloads
684
Likes
1
Makes
Indroducing the first design of my Hydroponic tower with hidden pump system.
Its a concept for a water-saving, self-watering and stackable tower planter.
The planting containers can be filled with rockwool or coconut coir plugs.
Default water tube diameter is 3mm, can be increased (by drilling or redesign) to fit the tube of your pumpsystem.
Second version of the distributer is for 19 up to 20mm tubes.
I bought a 5V USB - aquarium pump on Amazon and a fitting tube which is hidden inside the tower.
The pump is connected to a usb charger and this one is connectet to a Wifi programmable socket.
Total cost with pump system: ~10$
----------------------------------------
-100% scale = upper diameter 180mm.
-No support structure is needed.
Its a concept for a water-saving, self-watering and stackable tower planter.
The planting containers can be filled with rockwool or coconut coir plugs.
Default water tube diameter is 3mm, can be increased (by drilling or redesign) to fit the tube of your pumpsystem.
Second version of the distributer is for 19 up to 20mm tubes.
I bought a 5V USB - aquarium pump on Amazon and a fitting tube which is hidden inside the tower.
The pump is connected to a usb charger and this one is connectet to a Wifi programmable socket.
Total cost with pump system: ~10$
----------------------------------------
-100% scale = upper diameter 180mm.
-No support structure is needed.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
