Hyperboloid Lamp

A two-layer hyperboloid structure with a mount for the bulb socket.I had an old lamp, from which I took the bulb socket and built the hyperboloid structure around it. It's a E27 socket, screwed directly on the two small tubes (see the photo from above). FYI the distance between the two screws is 18mm.On the one plate is the tower, on the other - the lampshade. Additionaly youneed to buy one bulb socket of this kind and a cable with a switch and you're ready.- thread the cable through the opening at the bottom of the socket mount- connect the two wires to the bulb socket- fix the socket onto the mount with screws 3x12 mm- depending on the size of the bulb you may have to put the lampshade first and then screw the light bulb